Fault
Electric shaker does not work
Shaker fuse blows
!
Cleaning:
When cleaning and washing the machine, take care when using aggressive detergents, acids, etc.
Follow the instructions provided by the detergent producer, and wear protective clothing if appropriate (e.g. ove-
ralls, gloves, goggles, etc.).
!
Explosive atmosphere:
The machine is not constructed to work in environments where there is a risk that there might be explosive gases,
dusts or vapours, and so its use in an explosive atmosphere is FORBIDDEN.
!
Disposal of harmful substances:
Comply with the laws in force on waste disposal and treatment when disposing of the material collected, the ma-
chine fi lters and spend material such as batteries, engine oil, etc.
!
Scrapping the machine:
If the machine is scrapped, subdivide the types of materials of which it consists (EEC Directives) according to the
disposal method, so that they can be disposed of in accordance with the laws in force.
Consign hazardous materials such as batteries, spent oils, etc to operators authorized to dispose of these substan-
ces.
INFORMATION FOR USERS
In accordance with art. 13 of Legislative Decree no. 151 dated 25th July 2005 "Implementation of Directi-
ves 2002/95/CE, 2002/96/CE and 2003/108/CE, relating to the use of dangerous substances in electric and
electronic equipment, as well as the disposal of waste.
The symbol of the barred rubbish bin on the equipment or on the package indicates that, at the end of its lifetime,
the product must be collected separately from other waste.
The separate waste collection of this equipment at the end of its lifetime is organised and managed by the manu-
facturer. The user wanting to throw away this equipment must therefore contact the manufacturer and follow the
system adopted by the latter, in order to allow separate collection of the equipment at the end of its lifetime.
Suitable separate collection for subsequent sending of the equipment cast off for recycling, treatment and en-
vironmentally compatible disposal, contributes to preventing possible negative eff ects on the environment and
health and promotes the re-use and/or recycling of the materials of which the equipment is made.
Illicit disposal of the product by the holder leads to the application of administrative sanctions according to Legisla-
tive Decree no. 22/1997 (article 50 and subsequent articles of Legislative Decree no.22/1997).
The packing of the machine is manufactured by recycling materials. Consingn the spent materials to
operators authorized to dispose.
TROUBLESHOOTING (2/2)
Cause
Switch broken
Fuse blown
Excessive motor power absorption caused by,
worn pads, dirty or worn bearings.
Excessive motor power absorption
Faulty fuse
Wire short-circuit
SAFETY INFORMATION
(for "PROFESSIONAL" products)
37
Corrective action
Replace
Replace
Replace
(see above)
Replace
CCheck electrical system