Specifications; Safety Instructions - Makita BSR730 Betriebsanleitung

ENGLISH
1. Battery cartridge
2. Button
3. Red part
4. Lever
5. Clamping screw
6. Stopper
7. Base
8. Cutting line
9. Setting protuberances
10. Hex socket head bolt
11. Cutting depth

SPECIFICATIONS

Blade diameter
Max. Cutting depth
No load speed (min
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the tool. Be sure
that you understand their meaning before use.
Only for EU countries
Do not dispose of electric equipment together with house-
hold waste material!
In observance of European Directive 2002/96/EC on
waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric equip-
ment that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
Explanation of general view
12. Lock-off button
13. Switch trigger
14. Hex wrench
15. Shaft lock
16. Hose 28 mm in inner dia.
17. Vacuum cleaner
18. Bolt
19. Outer flange
20. Saw blade
21. Inner flange
22. Rear handle
Model
at 90°
at 45°
at 50°
-1
)
Net weight
END001-1
23. Front grip
24. Clamp screw
25. Rip fence (Guide rule)
26. Adjusting screw for 90°
27. Adjusting screw for 45°
28. Triangular rule
29. Limit mark
30. Brush holder cap
31. Screwdriver
BSR730
190 mm
378 mm
D.C. 24 V
Intended use
The tool is intended for performing lengthways and cross-
ways straight cuts and mitre cuts with angles in wood
while in firm contact with the workpiece.

SAFETY INSTRUCTIONS

WARNING:
When using battery operated tools basic safety pre-
cautions, including the following, should be followed
to reduce the risk of fire, leaking batteries and per-
sonal injury: Read these instructions before operat-
ing this product and save these instructions.
For safe operations:
1. Keep work area clean.
Cluttered areas and benches invite injuries.
2. Consider the work environment.
Do not expose the tool to rain. Keep work area well lit.
Do not use tools in the presence of flammable liquids
or gases.
3. Keep children away.
Do not let visitors touch the tool. Keep visitors away
from work area.
4. Store batteries or idle tools.
When not in use, tools and batteries should be stored
separately in a dry, high or locked up place, out of
reach of children.
Ensure that battery terminals cannot be shorted by
other metal parts such as screws, nails, etc.
66 mm
47 mm
42 mm
2,400
4.6 kg
ENA002-2
5