Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Configuration
How to select the scancode set for PS/2 keyboards:
1. Press
Ctrl+Num
2. Press
F1
to open the
3. Use the
Arrow keys
4. Use the
Arrow keys
5. Press
to save your settings.
F1
6. Restart the KVM switch. The setting applies after the restart.
Calling the On-Screen Display by mouse
In the default configuration, you can only the On-Screen Display can only be called
up with the preset key combination.
If a Microsoft »IntelliMouse Explorer« or another compatible mouse is connected to
the KVM switch, you can use the mouse keys
NOTE:
If you access the On-Screen Display by mouse, you cannot use Microsoft's
»IntelliMouse Explorer« or another compatible mouse when performing the Step-
scan function (see page 35).
How to disable/enable the mouse support to operate the On-Screen Display:
1. Press
Ctrl+Num
2. Press
to open the
F1
3. Use the
Arrow keys
4. Use the
Arrow keys
lowing options:
No:
OSD cannot be opened by mouse
Yes:
OSD can be opened with keys
5. Press
F1
to save your settings.
34 · G&D miniMUX8
(standard) to open the On-Screen Display.
Function
menu.
to select
Console Setup
to select
Scancode Set
(standard) to open the On-Screen Display.
menu.
Function
to select
Console Setup
to select
OSD by mouse
and press
Enter
.
and press
to select scancode set
Space
4
and
5
to access the On-Screen Display.
and press
.
Enter
and press
Space
4
and
5
of a compatible mouse
to select one of the fol-
or
.
2
3
Werbung
Kapitel
Inhaltsverzeichnis
