Enabling Or Resetting Ps/2 Mouses - G&D miniMUX8 Handbuch

Getting started

Enabling or resetting PS/2 mouses

Unlike USB mouses, PS/2 mouses do not support hot plug technology. You can
therefore insert the PS/2 plug during operation, but the input device might not be
detected by the computer.
To enable or reset the PS/2 mouse, the KVM switch can be used to send a special
command to the computer.
Since the commands differ depending on the used mouse type and the installed
operating system, four different setup keys are provided.
How to enable or reset the PS/2 mouse:
1. Press
Ctrl+Num
2. Press to open the
F1
3. Use the
Arrow keys
4. Select one of the following functions and press
Reset Mouse:
Enable Mouse (for Unix):
Enable Intelli:
Enable Intelli-Explorer
14 · G&D miniMUX8
(standard) to open the On-Screen Display.
menu.
Function
to select
Mouse Utility
Resets PS/2 mouse interface of a Windows computer
Enables PS/2 wheel mouse of a Linux computer
Enables PS/2 wheel mouse of a Linux computer
Enables PS/2 wheel mouse with additional mouse
keys of a Linux computer
and press .
Enter
Enter :