Getting Started; Setting Time And Date - Medisana MTA Bedienungsanleitung

GB

3 Getting Started

3.1
Inserting /
removing batteries
3.2
Setting time
and date
14
Insertion: Open the battery compartment
pressing against the bar and insert the four batteries supplied (batteries, type
AA LR 6). Remember to insert the batteries as indicated in the diagram in the
battery compartment. Replace the lid, pressing it until it snaps into place.
Removal: When the battery symbol appears in the display, please replace the
batteries with new ones. Should the used batteries be jammed in the
compartment, use a pointed instrument, such as a ballpoint pen, to carefully
prise them out.
After replacing batteries, remember that the time and date have to be
reentered. Previously stored results will be lost. Alternatively, you can use the
unit with a mains adaptor (MEDISANA Art.–No. 51008) This connects
the socket provided at the back of the unit.
BATTERY SAFETY INFORMATION
• Keep away from children!
• Do not short-circuit!
• Do not dispose of old batteries with your household waste,
but dispose of them at a battery collection station at a
recycling site or in a shop!
1. Press the TIME/SET button
time. First of all the entry point for the month flashes (1, 2, 3... 12).
2. Press the MEMORY button
the month appears.
3. Press the TIME/SET button
entry point for the date flashes.
4. Proceed in exactly the same manner as described in point 2 when entering
the date, hours and minutes.
5. In each case, press the MEMORY button
button to accept the entry.
6. On completing the entry, a 0 appears on the display
ready for a measurement.
underneath the unit by lightly
• Do not recharge!
• Do not throw into fire!
to enter the setting mode for date and
repeatedly until the desired number for
again to accept the setting. Now the
to select and the TIME/SET
to
and the unit is