Specifications - Panasonic AW-PH360L Bedienungsanleitung

Specifications

Power supply:
Power consumption: 3 A (camera power included),
1 indicates safety information.
Genlock input:
Camera video output:
Camera / pan/tilt head control:
• Controller (AW-RP301/AW-RP305)
Pan/tilt head control: RS-422 (RJ-45, modular jack)
• Controller (AW-RP501/AW-RP505)
Pan/tilt head control: RS-422 (RJ-45, modular jack)
Camera control: Interactive serial communication (BNC connector)
• Controller (AW-RP605A)
Camera / Pan/tilt head control: RS-422 (RJ-45, modular jack)
• Controller (AW-RP400)
Camera / Pan/tilt head control: RS-485 (RJ-45, modular jack)
• Controller (Personal computer, etc.)
Camera / Pan/tilt head control: RS-232C (28 pin, half pitch connector)
Lamp control:
Option control:
Maximum cable length:
• Controller (AW-RP301/AW-RP305/AW-RP501/AW-RP505/AW-RP400)
500 m (with BBC No.PSF1/2M, BELDEN 8281 coaxial cable, 10BASE-T straight
cable equivalent to UTP category 5)
• Controller (AW-RP605A)
1000 m (with BBC No.PSF1/2M, BELDEN 8281 coaxial cable, 10BASE-T straight
cable equivalent to UTP category 5)
When the SDI signal is transmitted:
200 m with BBC No.PSF1/2M, BELDEN 8281 coaxial cable
DC +12 V (connector)
1.3 A (pan/tilt head only)
Black burst or composite video (BNC connector)
Video: 75 Ω (BNC connector)
75 Ω (BNC connector)
Y:
75 Ω (BNC connector) (Switchable to SDI)
Pr:
75 Ω (BNC connector)
Pb:
SDI: BNC connector (Switchable to Pr)
Control signals (connector)
Control signals (connector)
- 47 (E) -