Panasonic AW-PH360L Bedienungsanleitung Seite 16

Installation
O Attaching the chain
1. Attach one end of the chain to the
pan/tilt head using a chain attachment
screw (M4!8 mm: with flat
washer/spring washer).
2. Position the other end of the chain over
the screw hole on the top of the camera
and attach it using a chain attachment
screw (M4!6 mm: with flat
washer/spring washer).
<Notes>
OBe sure to tighten all screws firmly with a
screwdriver or similar tool.
OWhen the hole on the camera is M2.6,
attach the chain with the M2.6!6 mm
(with flat washer/spring washer) chain
attachment screw.
OWhen using the AW-E860/AW-E750/
AW-E655 camera, the mounting spacer
must be attached to the top panel of the
camera before attaching the chain.
Position the end of the chain over the
hole on the mounting spacer and attach
it using a chain attachment screw
(M4!6 mm: with flat washer/spring
washer).
Be sure to tighten the mounting spacer
and all screws firmly with a screwdriver
or similar tool.
This chain is for use with the AW-E350,
AW-E650, AW-E655, AW-E750 and
AW-E860 convertible cameras. It cannot
be used with any other camera.
When attaching any other camera to the
pan/tilt head, carefully check the pan/tilt
head operation and that appropriate
measures have been taken to ensure the
camera does not fall.
(The installation work must be performed by your dealer without fail.)
- 15 (E) -
With the AW-E350/AW-E650
Chain attachment screw
M4!6 mm or M2.6!6 mm:
with flat washer/spring washer
Chain attachment screw
M4!8 mm: with flat
washer/spring washer
With the AW-E655/AW-E750/AW-E860
Chain attachment screw
M4!6 mm: with
flat washer/spring
washer
Mounting spacer
(included with
the AW-E655/
AW-E750/
AW-E860)
Chain attachment screw
M4!8 mm: with flat
washer/spring washer
Chain
Chain
Chain attachment screw
M4!8 mm: with flat
washer/spring washer
Chain