Cleaning And Maintenance; Troubleshooting; Technical Specifications - Velleman TRC11 Bedienungsanleitung

c. Flight Control
• Hovering Up And Down
o As soon as the helicopter stabilizes, you can slowly increase the throttle to lift the helicopter. Slowly decrease the throttle to lower it.
Only small amounts of changes are required to make the helicopter fly smoothly.
• Turning Right And Left
o Hold the helicopter at a stable height.
o Push the direction stick slightly to the right to turn right; push the direction stick slightly to the left to turn left.
• Accelerating And Decelerating
o Push the direction stick slightly to the left to decelerate the helicopter.
o Push the direction stick slightly to the right to accelerate.
• Flying Forward And Stopping
o The helicopter will slightly advance when gently turning to the right.
o To stop the helicopter, slightly jerk the direction stick to the left.
o Alternate this flying technique to direct and to fly your helicopter.

6. Cleaning and Maintenance

1. Regularly inspect the helicopter, the transmitter, parts and the battery charger for damage.
2. Wipe the helicopter and transmitter regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

7. Troubleshooting

Problem
Propeller does not move
Helicopter suddenly drops altitude.
Helicopter does not react.
Control loss.

8. Technical Specifications

Power Supply
Helicopter
Transmitter
Dimensions
Helicopter
Transmitter
Total Weight
Helicopter
Transmitter
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulted from (incorrect) use of this
device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
TRC11_v2
Possible Cause
• Helicopter or transmitter is switched off.
• Drained battery.
• Drained battery.
• Incorrect channel selection on transmitter.
• Another IR control device using the same
channel.
• IR eye affected by strong lighting.
1 x 3.7V LiPo rechargeable battery (incl.) + battery charger
1 x 9V E block battery (order code 6LR61C, incl.)
140 x 70 x 20mm
150 x 110 x 35mm
11g
145g
4
Solution
• Switch on your helicopter and / or transmitter.
• Recharge the battery.
• Recharge the battery.
• Reset the correct channel.
• Choose another place to operate your helicopter.
• Avoid direct sunlight or strong lighting..
VELLEMAN