Installation Menu; Display Description - Vimar RADIOCLIMA Bedienungsanleitung

4.1 Reset radio transceiver base station Menu
This function restores the Radio Base Station to its original default
configuration.
Press the combination +
appears on the display.
The message
Press to confirm or

4.2 Installation Menu

This function is used for associating radio devices or excluding
them from the system.
Press the combination +
Use the key to select the desired function, scrolling through the
sequence beginning with the function
6 - ENGLISH
for a few seconds.
to cancel.
.
.
Key Display Description
Eliminate internal communication interface
Autolearn internal communication interface
Autolearn-disassociate thermostat - actuator
Associate radio actuator channel with relay 1
Associate radio actuator channel with relay 2
Associate radio actuator channel with relay 3
Associate radio actuator channel with relay 4
Eliminate (exclude) radio relay actuator only
from primary
Press to display the logical ID.
Press to Confirm or to cancel.