Motorola LX2 plus Bedienungsanleitung Seite 17

Setting The Alert Mode
You can choose one out of four different Alert Modes:
D audible plus vibration
D audible (without vibration)
D gentle (low sound level)
Gsilent (vibration only)
Press # to display the function menu.
1.
Move the cursor ( ! and " buttons) until the speaker
2.
symbol D flashes.
Press # again to display the Set Alert Mode screen.
3.
Now select the wanted Alert Mode ( ! and " buttons) The
4.
symbol for audible D or silent G Alert Mode flashes, your
pager emits a short alert according to the chosen alert mo-
de. To escape without making changes,
Confirm your selection by pressing the # button. Your
5.
pager emits a short alert according to the chosen Alert
Mode.
Receiving And Reading Messages
As soon as your LX2 plus receives a message, it alerts and the
Message In Memory indicator is displayed. It indicates an in-
coming message.
1. Press any button to stop the alert.
2. If you do not recognize the alert (you do not press any
button) there will be a repetition in regular intervals.
To read the message press the Read Button (.
3.
The flashing arrow R at the bottom right corner of the
4.
screen indicates that the received message continues
beyond the first two lines of the display. To be able to con-
tinue reading, press the Read Button ( again. Each (
press advances the message to the next two lines. Press and
hold ( to rapidly scroll through your message.
If more than one message exists, press ! or " to select the
5.
message you want to read. The reversed arrow cursor L in-
dicates the location of your message in memory.
6. The Message In Memory Indicator of a message, that has
not yet been read, flashes until the message is read com-
pletely one time.
A flashing On & symbol indicates a message has been
7.
received, but has not yet been read.
press ( .