ZyXEL P-335U Schnellstartanleitung Seite 5

The LEDs
Look at the front panel LEDs. When you
connect the power, the PWR LED blinks and
stays on once the device is ready. About 30
seconds later, the A/G LED also comes on.
The LAN and WAN LEDs turn on if the
corresponding connections are properly made.
2 Accessing the Web Configurator
1 Launch your web browser. Enter "192.168.1.1" as the web site address.
Note: If the login screen does not display, check your browser's security settings (see
Troubleshooting for details) or make sure your computer is set to receive an IP address
dynamically (see
2 The Password window displays. Enter the
password ("1234" is the default) and click Login.
3 Change the password in the screen that follows
and click Apply.
Set Up Your Computer's IP
ENGLISH
Address).
4 Click Go to Wizard setup to set up your P-335U for
the first time.
5