Inhaltsverzeichnis
Werbung
1.
The machine must be inspected by a specialist technician who checks its safety or for any damage or defects in the following cases:
•
Before it is put into operation
•
After modifi cations or repairs
•
At regular intervals, as indicated in the «Routine maintenance and checks" table.
2.
Every six months check that the safety devices are in good working conditions; the inspection must be made by authorized specialist staff .
To ensure that the safety devices are properly operating , the machine must be overhauled by specialist staff or skilled workshop every 5
years.
3.
The person in responsable of the machine must make an annual check of its condition. During this checking, he must decide whether the
machine still complies with the technical safety regulations. After checking it has to apply on the machine a label of checking made.
Periodical maintenance checks
1
Check belts
2
Check that the main brushes is free fom wires, strings, etc.
3
Check dust fi lter
4
Replace dust fi lter
5
Check main and side brushes trace width
6
Check electrolyte of the battery
7
Check motor carbon brushes
Periodical maintenance checks
1
Check engine oil (*)
2
Check engine air fi lter (*)
3
Replace engine aire fi lter (*)
4
Check belts
5
Replace engine oil (*)
6
Check that the main brushes is free fom wires, strings, etc.
7
Check dust fi lter
8
Replace dust fi lter
9
Check main and side brushes trace width
(*) = See also the engine use manual of the constructor.
ROUTINE CONTROL AND MAINTENANCE
OPERATIONS AND SAFETY CHECKS
(electric version)
(petrol version)
72
Intervals in hours
8
40
125 150 1500
x
x
x
x
x
x
Intervals in hours
8
40
100 150 1500
x
x
x
x
x
x
x
x
x
x
Werbung
Inhaltsverzeichnis
