Astralpool APH3 INVERBOOST Benutzer- Und Wartungshandbuch Seite 23

5.3 Typical arrangement
NOTE
The factory supplies only the heat pump. All other components, including a bypass if necessary, must be
provided by the user or the installer.
ATTENTION:
In order to heat the water in the pool (or hot tub), the filtration pump must be running to
cause the water to circulate through the heat pump. The heat pump will not start up if the
water is not circulating.
5. 5. 5. Location Location Location and and and
This arrangement is only an illustrative example.
connection connection connection
- 19 -