Flash Light; Safety Recommendations - Beamz 151.250 Gebrauchsanleitung

Rigging
- Mount the Pin spot with the mounting-bracket to your trussing system using an appropriate clamp.
The hole in the mounting bracket has a diameter of 10mm.
- For overhead use, always install a safety-rope that can hold at least 10 times the weight of the
fixture. You must only use safety-ropes with screw-on carabines. Pull the safety-rope through the
hole in the mounting bracket and over the trussing system. Insert the end in the carabine and
tighten the fixation screw.
- Adjust the desired inclination-angle via the mounting bracket and fix the bracket screws tightly.
- Connect the fixture to the mains with the power plug.

FLASH LIGHT:

Operation
The BeamZ Mini Flash Light is switched on by plugging it into a mains outlet. You can set the flash speed via
a rotary control on the rear side.

SAFETY RECOMMENDATIONS

Do not look directly into the flash light. The short, strong flashes might cause health problems to persons
with photo sensitive disorders. The flash tube works with very high voltages of 400 Volts which are lethal.
Therefore you need to take following precautions:
-Keep the Mini Flash away from humidity and dust.
-Do not switch the unit on if the case is damaged.
-Do not make any repairs yourself.
Technical specifications:
MIRROR BALL MOTOR
Power supply: ..................................................................................... 230Vac / 50Hz
Power consumption: ............................................................................................ 4 W
Max Charge: ........................................................................................................ 3 kg
Max. Dia. of mirror ball: ..................................................................................... 30 cm
Rotation speed: ................................................................................................. 5 rpm
Diameter of base plate: ................................................................................. 110 mm
Height: ............................................................................................................. 58 mm
Weight: .............................................................................................................. 0.3 kg
Pin spot Par 36
Power Supply: ..................................................................................... 230Vac / 50Hz
Power consumption: .......................................................................................... 30 W
Weight: .................................................................................................................. 1 kg
Dimensions (LxWxH): ................................................................. 150 x 120 x 115 mm
Fitting Lamp: ...................................................................................... 6V 30W Par 36
Colour wheel with Motor
Power supply: .................................................................................... 230Vac / 50Hz
Rotation speed: .............................................................................................. 2.5 rpm
Colours: ................................................................................ Red, green, yellow, blue
Diameter: .......................................................................................................... 23 cm
Flash light
Power supply: ...................................................................................... 230Va.c./50Hz
Wattage: .............................................................................................. max. 14 Watts
Flash speed: ............................................ adjustable up to ca. 10 flashes per second
Dimensions (hxwxd): ................................................................................. 5x9x13 cm
Weight: ............................................................................................................... 250 g
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would
also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or
disrespect of the warnings contained in this manual. Tronios cannot be held responsible for personal injuries caused by a disrespect
of the safety recommendations and warnings. This is also applicable to all damages in whatever form.