Turbo Mode - Qlima Ronda 100 S-line Gebrauchsanweisung

3
ECONO SEND
TURBO
ON 1 AUTO OFF 1
ON 2 CANCEL OFF 2
8.
3
ECONO SEND
TURBO
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
9.
3
ECONO SEND
TURBO
AUTO
ON 1 OFF 1
ON 2 CANCEL OFF 2
10.
3
ECONO SEND
TURBO
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
11.
12.
4
158

TURBO MODE

In Turbo mode, the stove operates at maximum power for 30 minutes. In Turbo
mode the temperature is pre-set to 30ºC. After 30 minutes, the stove returns to the
mode before the Turbo mode was activated. To select Turbo mode, hold down the
ECONO SEND
button (1) for more than 2 seconds, and then push
TURBO
ECONO
ON 1 AUTO OFF 1
mode, hold down the
TURBO
ON 2 CANCEL OFF 2
ON 1
disappear from the remote control display and be replaced by the output level and
ON 2
the set temperature. Press
ECONO
TURBO
ON 1
ON 2
ECONO MODE
In Econo mode, the temperature remains constant. Every 10 minutes the stove
adjusts the power until heat output level 1 is reached. To select Econo mode, hold
down the button (1) for more than 2 seconds, until Econo appears in the dis-
ECONO SEND
play (2) and then push TURBO
ECONO SEND
AUTO
ON 1 OFF 1
TURBO
(1) for at least 2 seconds. The word Econo will disappear from the remote control
ON 2 CANCEL OFF 2 AUTO
ON 1
display (2). Press (3) to confirm your choice. See figure 9.
ECONO SEND
ON 2 CANCEL
TURBO
ON 1 AUTO
OFF 1
PROGRAMME 1 (ON1 AND OFF1)
ON 2 CANCEL
OFF 2
1. The desired switch-on and switch-off timer must be set when the
remote control is switched off.
2. The stove retains the temperature and heat output settings it had
before being switched off.
3. The minimum period of time between switching off and switching on
is 20 minutes. This is the time needed for the stove to complete the
cooling-down phase.
4. After a brief power interruption, the timer mode will have to be set
again.
ECONO SEND
ACTIVATE AUTOMATIC MODE (ON1)
TURBO
Press button ON 1 (1) to switch on the stove according to programme 1. The time AUTO
OFF 1
CANCEL
ON 2 OFF 2
and ON1 symbol will flash on the remote control. Use the buttons
(2&3) to select the desired time (10-minute intervals). To confirm, choose
The desired activation time is shown in the remote control. Press
The display (5) on the stove will show Chrono. See figures 10 and 11.
ECONO SEND
DEACTIVATE AUTOMATIC MODE (OFF1)
TURBO
Press button ON 1 AUTO (1) to switch off the stove according to programme 1. The time
OFF 1
ON 2 CANCEL OFF 2
and OFF1 symbol will flash on the remote control. Use the buttons
(2&3) to select the desired time (10-minute intervals). To confirm, choose
The desired deactivation time is shown in the remote control. Press
firm. The display on the stove will show Chrono. This text will disappear when the
set switch-on time and switch-off time have elapsed. See figure 12.
PROGRAMME 2 (ON2 AND OFF2)
As above but use buttons
SEND
button (1) for at least 2 seconds. The word Turbo (2) will
AUTO OFF 1
CANCEL OFF 2
(3) to confirm your choice. See figure 8.
SEND
AUTO OFF 1
CANCEL OFF 2
(3). To deactivate this mode, hold down the
OFF 1
OFF 2
ECONO ECONO SEND SEND
TURBO TURBO
AUTO AUTO
ON 1 ON 1 OFF 1 OFF 1
(1) and (2).
ON 2 ON 2 CANCEL CANCEL OFF 2 OFF 2
(3). To deactivate this
ECONO SEND
TURBO
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
button
ECONO SEND
TURBO
AUTO
ON 1
ON 2 CANCEL
ECONO SEND
ECONO
and
TURBO
ECONO SEND
TURBO
AUTO
ON 1 ON 1
TURBO
ON 2
ON 2 CANCEL
ON 1 AUTO (4) to confirm.
OFF 1
ECONO SEND
TURBO
ON 2 CANCEL OFF 2
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
ECONO SEND
ECONO SEND
and
TURBO
ECONO SEND
TURBO
ON 1 ON 1 AUTO AUTO
OFF 1
TURBO
ON 2 CANCEL OFF 2
CANCEL
ON 2
AUTO (4) to con-
ON 1 OFF 1
ECONO SEND
ON 2 CANCEL TURBO OFF 2
ON 1 AUTO OFF 1
ON 2 CANCEL OFF 2
OFF 1
OFF 2
SEND
(1). OFF 1 AUTO OFF 1
CANCEL OFF 2
OFF 2
(1).
OFF 1
OFF 2