Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance; Storage, Cleaning; Disposal; Notes On The Guarantee And Service Handling - Crivit 292821 Gebrauchsanleitung

Big-wheel-scooter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4

Maintenance

Replacing the rollers (Fig. H)
Important!
Please refer to chapter "Technical Data" . Rollers
with a different diameter can alter the riding
properties and possibly endanger the user . Do
not use rollers which cannot be easily installed .
Never install rollers larger than the original
rollers on the scooter .
Rollers wear down . This wear depends on many
factors, such as the ground, size and weight of
the user, weather conditions, and the material
and hardness of the rollers . They therefore occa-
sionally need to be replaced .
1 . Loosen the axle bolts (17) using two size 5
socket head wrenches .
2 . Remove the axle bolts and remove the roller .
3 . Install the new roller (18) and secure with the
axle bolts .
After replacing:
Do not use if the roller grinds against the side
after replacing!
Verify all screws are still tight after the first few
minutes of riding and nothing has detached or
loosened .
Retighten the roller to ensure it runs smoothly and
the bearings are silent .
Replacing the ball bearings (Fig. I)
1 . Replace the roller (18) as described in section
„Replacing the rollers" .
2 . Carefully pry out the respective bearing (20)
using a socket head wrench .
3 . Remove the spacer (19) from the roller and
turn it over .
4 . Prey out the other bearing using a socket
head wrench .
5 . Push in a new bearing . Turn the roller over,
insert the spacer, then push in a second new
bearing .
6 . Reattach the roller as described in section
„Replacing the rollers" .

Storage, cleaning

We recommend thoroughly cleaning and drying
the product after use .
12
GB/IE
Remove small stones or other objects which may
be stuck to the rollers . Dry wet or damp ball
bearings with a clean cloth . Grease the bearings
with suitable bearing grease from the outside to
prevent rust forming on the outside .
Always store the product in a dry location .

Disposal

Dispose of the article and the packaging materi-
als in accordance with current local regulations .
Packaging materials such as foil bags are not
suitable to be given to children . Keep the pack-
aging materials out of the reach of children .
Notes on the guarantee and
service handling
The product was produced with great care and
under constant supervision . You receive a three-
year warranty for this product from the date of
purchase . Please retain your receipt .
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling . Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty .
With regard to complaints, please contact the
following service hotline or contact us by e-mail .
Our service employees will advise as to the
subsequent procedure as quickly as possible .
We will be personally available to discuss the
situation with you .
Any repairs under the warranty, statutory guar-
antees or through goodwill do not extend the
warranty period . This also applies to replaced
and repaired parts . Repairs after the warranty
are subject to a charge .
IAN: 292821
Service Great Britain
Tel .:
0871 5000 720
(£ 0 . 1 0/Min . )
E-Mail: deltasport@lidl .co .uk
Service Ireland
Tel .:
1890 930 034
(0,08 EUR/Min . , (peak))
(0,06 EUR/Min . , (off peak))
E-Mail: deltasport@lidl .ie

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bw-4533

Inhaltsverzeichnis