Load Cell Marking Slb615D; Special Conditions For Safe Use; Commissioning And Installation; Usage - Mettler Toledo SLB615D Dokumentation

2.4 Load Cell Marking SLB615D

Other markings are as shown in the following labels which are attached to the product.
For Details on temperature class / coding please see section 2.1
Load cell variations include capacity, metrological performance, cable length, label and jacket material of polyurethane or FEP.

2.5 Special Conditions for Safe Use

None for SLB615D.

3 Commissioning and Installation

a. This equipment can be used in zone 2 and 22.
b. This equipment complies with protection class > IP68 / EN 60529.

4 Usage

The load cells are only allowed for applications in accordance with METTLER TOLEDO documentation. Misuse will cause the loss of
warranty and manufacturer's responsibility.
a. If the load cells are not powered from an intrinsically-safe circuit, it is required that the load cell cables be terminated outside of the
hazardous area or be terminated in suitable junction boxes.
b. If used in hazardous dust environment the dust layer on the load cell body must not exceed 5 mm in thickness.

5 Maintenance

Maintenance interventions on these load cells must be carried out by METTLER TOLEDO authorized personnel only.
4
Commissioning and Installation
30095707D SLB615 Load Cell