Preliminary Operations; Power Supply; Initial Settings; Time And Date Setting - Palazzetti MULTIFIRE NICOLAS Installations, Bedienungs Und Wartungsanleitungen

8 PRELIMINARY
OPERATIONS
8.1 LOADING THE PELLETS
The pellets are loaded into in the hopper using a
scoop.
Do not empty the sack directly into the hopper so
as to avoid loading sawdust or other foreign bodies
that may affect proper stove operation and avoid
spilling pellets outside of the hopper.
Make sure the hopper lid is well closed again after
having loaded the pellets.
To se t e a to om
tto s to move to t e f el ico
e ter . se t e
a d t e press e ter
To disa le t e f
.

8.2 POWER SUPPLY

Plug the stove into the mains power supply, move
the power switch (Fig. 8.1- A) to position "I" . If the
connections are correct the stove will emit a series
of intermittent beeps, the display will come on.
Make sure not to touch the control panel while
plugging the stove into the power supply.
If not using the appliance for an extended period,
the switch should be moved to position OFF (0 -
.
The stove will only operate properly if it has the
proper electrical power supply. Do not operate
the stove without electrical power!

8.3 INITIAL SETTINGS

The language, current date and time need to be
set before using the stove.

8.3.1 Time and Date setting

To set the date:
a) Use the
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu
d)
e)
f)
g)
h)
i)
j) Press
48/144
USE AND & MAINTENANCE
f ctio press t e arro
a d press
tto s to select
.
ctio rat er t a LL select
buttons to go to the setup menu
LL
and press ;
[3]
and press
buttons and press
buttons and press
buttons and press
buttons and press
buttons and press
Fig. 8.2
;
;
;
;
;
cod. 004771980 - 09/2014 - Palazzetti - PN - Italy
A
Fig. 8.1
buttons;