Configuring The Wireless Network Settings - Belkin G Plus MIMO Benutzerhandbuch

Using the Web-Based Advanced User Interface

Configuring the Wireless Network Settings

The "Wireless" tab lets you make changes to the wireless network
settings. From this tab you can make changes to the wireless network
name (SSID), operating channel, encryption security settings, and
configure the Router to be used as an Access Point.
Changing the Wireless Network Name (SSID)
To identify your wireless network, a name called the SSID (Service
Set Identifier) is used. The SSID is your network name. The default
network name of the Router is "Belkin G Plus MIMO_" followed by
six digits that are unique to your Router. Your network name will look
something like "Belkin G Plus MIMO_012345". You can change this to
anything you choose, or you can leave it unchanged. Keep in mind, if
you decide to change your wireless network name, and there are other
wireless networks operating in your area, your network name needs
to be different from other wireless networks that may be operating
in your area. To change the SSID, type in the SSID that you want to
use in the SSID field
immediate. If you make a change to the SSID, your wireless-equipped
computers may also need to be reconfigured to connect to your new
network name. Refer to the documentation of your wireless network
adapter for information on making this change.
(1)
and click "Apply Changes"
46 46
(2)
. The change is
(1)
(2)