Sharp FU-S25E Bedienungsanleitung Seite 9

2
2
Install the filters
Place the HEPA Filter
1
within the main unit with
the tabs facing up.
Do not install the filter backwards or
the unit will not operate properly.
2
Place the Active Carbon
Filter on top of the HEPA
Filter.
Make sure that the tab of the
HEPA Filter remains visible.
3 Insert the bottom side tabs of the Filter Support
into the associated holes of the main unit.
Next push the upside tabs into the main unit.
4
Fix the Front Panel to the
main unit.
Fill in the usage start date
5
on the Date Label.
Use the date as a guide for the
Filter Replacement schedule.
Tab
Active Carbon Filter
Holes
Filter Support
E-7
Tabs
Up side Tabs
Bottom side tabs
Date Label
HEPA Filter
Tabs