Palazzetti SMALL 54T Installations, Bedienungs Und Wartungsanleitungen Seite 33

INSTALLATION
6.4 PELLETS LOADING
The pellets are loaded via a hatch to be tted to the
hood of the enclosure and connected to the stove
with the optional accessory equipment. Make sure
to follow the installation instructions included with
the kit.
Fig. 6.4.4 A
Do not use the stove removal system to load the
pellet tank.
Do not use non-original accessories.
Pellets falling outside the tank can compromise the
proper operation of the stove and may ignite and
cause re.
The pellet loading pipe must be used solely as a
chute for loading the tank and not as an extension to
the tank itself; do not ll the tank beyond its normal
capacity (without the pipe).
6.4.1 Optionals available:
A) Loading system with exible metal tube and loading
door (Fig. 6.4.4 A)
B) Front loading drawer (Fig. 6.4.4 B)
C) Pedestal kit (Fig 6.4.4 C)
Fig. 6.4.4 B
Fig. 6.4.4 .C
33
00 4776980 - 06/2018 - PN - Italy