Switichng The Clock On And Off; Technical Data - X-Watch XLYNE Pro Online Benutzerhandbuch

•
Connect the other end of the cable to a charging adapter or the USB port of a powered-on
computer.
•
Make sure the charger or computer is connected to a power/power outlet. Attention!
Detection on the PC/computer and starting the recharge process can take up to 5
minutes.
The battery level of your IVE XW FIT can be read on the watch screen. The IVE XW FIT notifies
you when the battery level is low. In this case, recharge the Watch as soon as possible.
Information on battery consumption
•
The operating time of the battery is correlated with your usage behavior and the condition
of the battery.
•
The battery is subject to signs of wear and tear. Note that running multiple applications or
functions at the same time reduces battery life. When at rest, the battery charge is also
reduced - even if the device is not actively used.
•
Over time, as with all consumables, there may be a reduction in loading capacity

SWITICHNG THE CLOCK ON AND OFF

To turn on the IVE XW FIT:
Hold down the left button of the IVE XW FIT for about 3 seconds until the screen of the IVE XW
FIT lights up.
To turn off the IVE XW FIT: Hold down the left button of the IVE XW FIT for about 3 seconds until
the IVE XW FIT turns off. Follow all warnings and instructions from authorized people in areas
where wireless devices are prohibited. You should refrain from using the aircraft during take-off
and landing and use in certain hospital areas.
SWITICHING THE SCREEN ON AND OFF
To activate the screen, briefly press the screen or the left button. The screen will only respond
when the specific sensor surface is tapped. The screen turns off automatically after the clock is
inactive for 10 seconds.

TECHNICAL DATA

product size
weigth
Packaging size
Battery
Display
42mm(length)*40mm(width)*9,4mm(height)
28-33g
7,1cm*7,1cm*12,2cm
130mAh
240*240 Pixel
26