Safety Precautions - Panasonic CZ-64ESMC3 Installationshandbuch

ENGLISH

Safety Precautions

Please Read Before Starting
 This controller must be installed by the sales dealer or installer.
These instructions are all you need for most installation sites and maintenance
conditions. If you require help for a special problem, contact our sales/service outlet
or your certifi ed dealer for additional instructions.
WARNING
CAUTION
 We assume no responsibility for accidents or damages resulting from methods
other than those described in the installation instructions or methods without using
specifi ed parts. Malfunctions that occurred due to the unauthorised installation
methods are not covered by the product warranty.
 This controller shall be installed in accordance with National Wiring Regulations.
 After the installation is complete, perform test operation to confi rm that no
abnormality is present.
 Read the installation instructions of devices to be connected as well.
 When relocating or repairing this controller, provide the Installation Instructions to the
servicing personnel
ELECTRICAL SHOCK CAN CAUSE SEVERE PERSONAL
INJURY OR DEATH. ONLY A QUALIFIED, EXPERIENCED
ELECTRICIAN SHOULD ATTEMPT TO WIRE THIS SYSTEM.
 Highly dangerous electrical voltages are used in this system.
Carefully refer to the wiring diagram and these instructions
when wiring.
Improper connections and inadequate grounding can cause
accidental injury or death.
 This controller is strongly recommended to be installed with
Earth Leakage Circuit Breaker (ELCB) or Residual Current
Device (RCD).
Otherwise, it may cause electrical shock and fi re in case of
equipment breakdown or insulation breakdown.
Earth Leakage Circuit Breaker (ELCB) must be incorporated in
the fi xed wiring in accordance with the wiring regulations. The
Earth Leakage Circuit Breaker (ELCB) must be an approved
10 A, having a contact separation by 3 mm in all poles.
6
(EN)
This symbol refers to a hazard or unsafe practice which can result in
severe personal injury or death.
This symbol refers to a hazard or unsafe practice which can result in
personal injury or product or property damage.
WARNING