Werbung
Verfügbare Sprachen
Verfügbare Sprachen
add a third position at -20°.
The refrigeration unit is designed to maintain the temperature of the product
displayed and not to lower it. Food products must only be introduced if already
cooled to their respective storage temperatures.
DO NOT introduce products that have been heated.
DO NOT load the top of the unit with boxes, packages, or other things (Rif.
17).
DO NOT climb on the front of the unit to ease loading operations, for any
reason (Rif. 13). Use an appropriate and suitable ladder to reach the loading
points. It is the Client's responsibility to ensure that all operations are carried
out safely and in accordance with the norms in effect
DO NOT obstruct the refrigerated air entry in an way (merchandise, price
labels, price holders, etc.)
The maximum allowable load for the shelves is 160kg/m
350kg/m
DO NOT load the cabinet with all doors open at the same time (Rif. 27);
Limit the time the doors are open during loading of merchandise.
It is the responsibility of the client to use appropriate communication methods
to inform customers how the doors work and not to climb on the front to reach
products.
To avoid merchandise sliding on tilted shelves, always use the containment
edges.
First use up the goods that have been stored in the unit the longest, before
adding new arrivals (food stock rotation);
16.Defrosting and water discharge (Rif. 23)
The Osaka 2 line of refrigeration units is provided with a simple-stop system by
means of the stopping of the refrigeration cycle.
Electric defrosting can be requested as an option (defrosting occurs by stopping the
refrigeration cycle and the use of an armoured resistance in the evaporator).
16_1.Water discharge:
To drain the defrost water, you need to:
have a floor drain with a slight incline (Rif. 24);
install the provided siphon between the unit drainage pipe and the floor connection.
hermetically seal the floor drainage area.
This will prevent unpleasant odours from forming within the unit, the dispersion of
refrigerated air and possible unit malfunctioning due to humidity.
Periodically check that the hydraulic connections are still efficient, contacting a
qualified installer.
17.Lighting
Internal lighting of the unit is obtained by OSRAM fluorescent lights. The light switch is
beside the light fixture.
For greater energy savings, the cabinet can be ordered complete with low
consumption LED lighting. This allows for:
reduced lighting consumption
reduced refrigerator load
lifespan of lights: over 6 years
uniform light intensity and colour
improved lighting as temperature decreases.
18.Replacing bulbs (Rif. 18)
Replace the bulbs as follows:
Turn off the unit's power supply.
05060127 00 14/02/2012
2
Osaka 2
English
2
and for the tank is
33
Werbung
Kapitel
