Hunter Basic Bedienungsanleitung Seite 8

02 – Mode Switch (Power Switch):
A. OFF: Power Off mode
B. SETUP: Setup mode
When the camera is set at the setup mode, the color LCD screen will light up.
When the color LCD is activated, press the Menu button to enter the camera
menu for settings, playback...etc.
When under the camera menu, the Menu button is used as Exit button.
NOTE! THE CHANGED SETTINGS WILL ONLY BE SAVED AFTER THE
MENU BUTTON IS PRESSED TO EXIT THE CAMERA MENU
C. ON: Power On mode (working mode)
When the camera is set at on mode, the color LCD screen will turn off and start
working as the settings.
03 – OK (Set/ Save) Button
04 – Up Button:
When the camera is set at the setup mode, press the up button can enter the
playback mode.
05 – Left Button
06 – Down Button
07 – Right Button:
When the camera is set at the setup mode, press the right button can display time
on the color LCD screen.
Power Switch
1) Switch camera "ON", the indicator LED will flash 5 times,
then camera enter PIR Auto mode;
2) Switch camera "Setup", the camera LCD screen will be
lightened, then camera enter Test mode;
3) Switch button "Off", camera turn off.