Switching The Illuminated Area On/Off; Setting The Illuminated Area - Silvercrest SKS 4 A1 Bedienungsanleitung Und Sicherheitshinweise

♦ Select the desired melody with the arrow buttons ▲ ▼
button. Press the SET button
♦ To exit the setup menu, use the arrow buttons ▲ ▼
and press the SET button
Switching the illuminated area on/off
By default, the light of the illuminated area
pending on the time of day and the setting, one or both halves of the illuminated
area
(light + sound) or (light only) position.
If the alarm is only to be activated with sound and you do not want to use the
night light, you can completely deactivate the LED light of illuminated area
♦ In standby mode (face or time on the display
button
the time setting
♦ Use the arrow buttons ▲ ▼
press the SET button
♦ Select
♦ To exit the setup menu, use the arrow buttons ▲ ▼
and press the SET button

Setting the illuminated area

You can make your own settings for the two LED lights of the illuminated area
NOTE
► The light must be activated. When the light is deactivated, neither of the
two LEDs lights up (see section "Switching the illuminated area on/off").
♦ In standby mode (face or time on the display
button
the time setting
♦ Use the arrow buttons ▲ ▼
and press the SET button
♦ Use the arrow buttons ▲ ▼
–
–
♦ To exit the setup menu, use the arrow buttons ▲ ▼
and press the SET button
SKS 4 A1
are permanently illuminated as soon as the main switch
for approx. 3 seconds to call up the main menu. The symbol for
flashes on the display
.
to turn off the light or
for approx. 3 seconds to call up the main menu. The symbol for
flashes on the display
: Both halves of the illuminated area
light is switched on and in the event of an alarm.
: When the light is switched on and in the event of an alarm, only one
of the two halves of the illuminated area
again to return to the previous menu
.
is activated. This means that, de-
), press and hold the SET
.
to select the symbol for the light setting
to turn the light back on again.
.
), press and hold the SET
.
to select the symbol for the illuminated area
.
set
to the desired function:
always light up when the
.
and press the SET
.
to select the symbol
is in the
.
and
to select the symbol
lights up.
to select the symbol
GB │ MT │ 81
.
■