Technical Support - Siemens SIPART PS2 Kompaktbetriebsanleitung

Certificates and approvals
CE conformity
Explosion protection
Explosion protection in accordance with
Intrinsic safety "ia"
Intrinsic safety "ic"
Non-sparking "nA"
Permissible ambient temperature
A Appendix
A.1 Certificate
The certificates can be found on the enclosed CD and on the Internet under:
Certificates (http://www.siemens.com/processinstrumentation/certificates)
A.2

Technical support

Technical Support
If this documentation does not provide complete answers to any technical questions you may have, contact Technical
Support at:
● Support request (http://www.siemens.com/automation/support-request)
● More information about our Technical Support is available at
Technical support (http://www.siemens.com/automation/csi/service)
Internet Service & Support
In addition to our documentation, Siemens provides a comprehensive support solution at:
● Service&Support (http://www.siemens.com/automation/service&support) where you will find support news, support
documents including EDDs and software, and also support from experts.
Additional Support
If you have additional questions about the device, please contact your local Siemens representative.
Find your local contact partner at:
● Partner (http://www.automation.siemens.com/partner)
Documentation for various products and systems is available at:
SIPART PS2 (6DR5...)
A5E03436620-05, 09/2014
The applicable directives and standards applied with their revision levels can
be found in the EC declaration of conformity on the Internet.
Ex markings
ATEX
Zone 1:
II 2 G Ex ia IIC T6/T4 Gb
Zone 21:
II 2 D Ex ia IIIC 110°C Db
Zone 2:
II 3 G Ex ic IIC T6/T4 Gc
Zone 2:
II 3 G Ex nA IIC T6/T4 Gc
T4: -40 ... +90 °C (-40 ... +194 °F)
T6: -40 ... +60 °C (-40 ... +140 °F)
51