Hints For Your Work With The Tool - Okay GS 8014 LI Gebrauchsanweisung

switch B. After the tool has been switched on, you do not
have to hold the switch-on lock A any longer.
To switch off just let go of the switch B.
Attention! The blades will coast for a certain
time after switch-off!

Hints for your work with the tool

The grass shears allow for clean cuts of lawn edges or
hardly accessible lawn areas.
As the device is operated with one hand
please be careful not to move the other hand
near the running cutting tools.
Maintenance
Put the included blade guard into the blade(s) and use
protective gloves to protect yourself from injury.
Push both lateral push buttons concurrently and remove
the shearing blades (Fig. 4).
4
3
Remove any dirt from the gear area (if necessary).
Please slightly grease the drive area (D and C) using
commercial universal grease before putting the replace-
ment shears in place (Fig. 6).
Lead the cutting blades with the rear holding toe into
the housing of the grass shears as shown in fig. 5 and
lock the click system in place by strongly pushing on the
blade base plate.
GB | Operating Instruction
2
1
1
5
1
The position of the eccentric drive does not have to be
considered when changing the blades. When the device
is switched on, the gear eccentric unit automatically
engages into the appropriate relief in the shearing blade.
The device is now ready for operation.
6
D
Clean the blade from any crushed plants and dirt. The
blades should be detached at least once a season for
the removal of debris. Lubricate the C pinion and the
D back of the blade with a light oil. Do not lubricate the
motor and other parts. Should the blade become dull
after a long period of use, a spare part can be ordered.
Warning! The leading edges of the blades must be oiled
to ensure proper lubrication. If the leading edges are not
oiled, blade durability may be adversely affected.
If the cutting tools have become dull after long use
please replace them with original spare parts.
Clean the device using only a brush or cloth. Do never
wash down the device with water and do never dip the
device into water.
7
2
C