Inhaltsverzeichnis
Werbung
Intimidator Spot Duo 155 QRG
Fuse
Replacement
Mounting
Mounting
Diagram
Control Panel
Description
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver, loosen the fuse holder and pull
straight out.
3. Remove the blown fuse from the safety cap and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder.
5. Reconnect the product to power.
Before mounting this product, read the
Mounting Clamp
Hanging Bracket
Tripod Insertion
When using only one mounting clamp with this fixture, you must use a
clamp with a captive bolt to prevent accidental loosening.
Button
<MENU>
Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Safety
Notes.
Rubber Feet
Function
4
EN
Safety Cable
Werbung
Inhaltsverzeichnis
