Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 21
EN
Control Panel
Description

Menu Options

Main Level
CH-1–CH-4
orL
Wirelss
Remote
Control
Button
Function
<MENU>
Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Programming Levels
oFF
rAnd
Co 1–Co 9
on
oFF
To trigger fog output and activate the color program using the wireless
remote control, do the following:
1. Plug the wireless receiver into the Remote Control Receiver port on
the side of the Geyser™ RGB Jr.
2. On the wireless transmitter, press the button assigned to the color
program (1–4). The Geyser™ RGB Jr. emits fog and activates the
color program for as long as you hold down the button.
Note: If the color program is set to oFF for any trigger button, only fog
output is triggered when that button is pressed.
If the color program is set to oFF for any trigger button, only fog
output is triggered when that button is pressed.
Color program off (default)
Selects preset color program
Selects preset colors
Sets fog fluid sensor to on or off
7
Geyser™ RGB Jr. QRG
Description

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis