Usb Connection - Akasa integral P2NSX Bedienungsanleitung

USB CONNECTION

Connecting the Integral SATA (USB mode)
1. Connect one of the two Type A connectors of the USB-to-DC cable to any available active USB
port on the PC / MAC.
2. Connect the other end of the USB-to-DC cable into the DC 5V port of your Integral SATA
enclosure. The LED integral logo should light on.
3. Connect one end of the USB-Data cable to any available active USB port on the PC / MAC and
the other end to the USB port of your Integral SATA enclosure.
4. Let Windows / MAC search and install the
driver automatically.
Windows-
open "My Computer" or
"Computer" to see the icon of the
external hard drive ready to use.
USB Connection
6