Usb Connection - Akasa elite Bedienungsanleitung

4. Secure the enclosure backplate to the housing using the screws provided.
5. You are now ready to connect your SATA 2.5" enclosure to the system.
Choose the connection you want to use (USB or eSATA) and move to the corresponding chapter
of the manual for further instructions.
NOTE: Do not connect both (USB and eSATA) cables at the same time.
5
HDD Installation
DC5V
E-SATA
ESATA

USB CONNECTION

Connecting the Elite enclosure (USB mode)
1. Connect both Type A connectors of the USB cable to any two available USB ports on the PC
or MAC. NOTE: in some cases using single USB connector can be sufficient
(depends on HDD power consumption).
2. Connect the other end of the USB cable into the USB port of your Elite enclosure. The LED should
light up. Windows or MAC operating system will search for and install the driver automatically.
3. (Windows)
To see your Elite hard drive enclosure open "My Computer" (Windows 2000/XP) or
"Computer" (Windows Vista). Double click on the icon of the external hard drive ready to use.
(MAC)
The icon of the ready to use external drive will appear on the desktop.
USB Connection
6