Cycle Library; Configure System - Fagor LA-11 Bedienungsanleitung

It is possible to select all the programmes or the programmes which are saved in favourites,
indicating the number of programmes selected at all times.
The set of programmes selected will be saved in a folder "PROGRAMMES" in the USB root
directory and each programme will be a file.
5.1.3

Cycle library

The name of each cycle can be modified from the cycle library. Once included in a programme,
when displaying the cycle information, the name displayed for the cycle will be different. It will be a
dynamic name consisting of the phase type and a parameter (Temp, rpm).
The cycle library will be editable, and the existing cycles can be created, modified, copied or
deleted.

5.2 Configure System

Access: [Main screen]
The following sections can be modified in the system configuration:

Language: The washing machine texts can be displayed in 34 different languages,
although the texts can only be edited using Western character sets.

Time: Configuration of the current time. The display format (12 hour / 24 hour (default
setting)) can be selected.

Date: Configuration of the current date. The display format (dd/mm/yyyy (default setting)
/ yyyy/mm/dd / mm/dd/yyyy) can be selected.

Units of measurement: The unit of measurement in which the temperature (ºC (default
setting) or ºF), the weight (Kg (default setting) or lb) and the size (mm (default setting) or in)
can be selected.

Thermal stop: General configuration of the thermal stop. If this is disabled, the thermal
stop does not take place even if this parameter is active in the currently running cycle. If,
however, it is enabled, the configuration of each cycle is respected and the consequent action
is taken. By default it is active.

Water saving by weight: The required water saving for the weight can be configured.
Three different options can be selected (1 feather: low saving, 2:medium, 3:high).
Depending on the load, there will be a reduction in the water level and detergent dose.

Levels: This enables the configuration in mm of the 5 configurable levels. Each level
type will have a default value and configuration range. These values will depend on the model
selected. (

Speed: This enables the configuration in RPM of the different types of speed existing, in
both the wash and spin cycles. Each speed type has a minimum and maximum configuration
See table of RPM/V equivalences by model
value. (
See table of levels by model
[Main Menu]
)
)
EN
Page 22 of 43