Maintenance - Renishaw REVO-2 Handbuch

REVO-2 user's guide
www.renishaw.com

Maintenance

CAUTION: Always refer to the 'Safety' and 'Warnings' sections of this guide. Failure to do so could lead to personal injury.
Following the simple procedures given below will prolong the operational life and maintain the high performance of the system.
The user should determine the frequency of inspection and maintenance actions according to the conditions of use.
The head labels are best cleaned with a slightly damp cloth. All other system components should be cleaned using a soft, lint free cloth and
must be kept dry.
The kinematic coupling mechanisms incorporated throughout the system have precision ball seating and permanent magnets. It is
recommended that all these features be cleaned before first use, and thereafter at regular intervals. The frequency of cleaning depends on the
local environment conditions, but should be at least every 500 changes.
A cleaning kit for the precision ball seating and permanent magnet is available from your Renishaw supplier (part number A-1085-0016). It
comprises strips of 'yellow tack' material. Use the yellow tack to clean the areas indicated with arrows on the image below.
With clean hands, tear off a small piece, shape into a small ball and press into/onto each of the features in turn, rotating to a fresh piece of
material as you work around.
CAUTION: Ensure no yellow tack debris is left on the surface. The yellow tack should not be used for the optical windows.
Issued 10 2019
35