Preparation For Operation - GRAPHITE 59G872 Betriebsanleitung

Use the tool according to its purpose only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Side shield for cutting disc
2. Stationary shield
3. Cutting disc
4. Base
5. Vice
6. Movable shield for cutting disc
7. Carbon brush cover
8. Transport handle
9. Safety switch
10. Switch
11. Handle
12. Crank
13. Split nut of vice screw
14. Vice screw
15. Sliding jaw
16. Fixed jaw
17. Fixing screws for fixed jaw
18. Head locking pin
19. Head
20. Spindle lock
21. Adjustment screw
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Two sided ring spanner
2. Locking pin
3. Crank
Remove power cord plug from mains socket before working at the device.
TRANSPORT PROTECTION / MOVING THE PORTABLE CUT OFF SAW
Secure the head in the lowest position for transportation.
● Use the handle (11) to press the head (19) in the lowest position possible and secure with the head
locking pin (18) (fig. A).
●
When lifting the portable cut off saw hold the transport handle (
when holding the handle (11).
VICE
Each piece of material must be well fixed in the vice before cutting.
– 1 pce
– 1 pce
– 1 pce

PREPARATION FOR OPERATION

14
8). Do not carry the portable cut off saw