Quick Start - DeFelsko PosiTest PC Powder Checker Kurzanleitung

1. POWER-UP the PosiTest PC by pressing the
2. ZERO the gage using the supplied Zero Fixture (pg. 4).
3. MEASURE the applied powder (pg. 4).
4. ADJUST to the specific powder if necessary (pg. 8).
NOTE:
To preserve battery life, the PosiTest PC will power
down after approximately 5 minutes of no activity. All settings are
retained.
Sensor/Screen
Display
Buttons
USB Port
Introduction

Quick Start

The USB Port has several functions:
Gage updates (pg. 10)
USB Keyboard Mode /
live stream readings (pg. 10)
Download stored readings to
PosiSoft Desktop (pg. 10)
Allows the gage to be operated
without batteries when
connected to a suitable
USB power supply
1
button.