Trouble Shooting - Hoover COMBI Bedienungsanleitung

10. Change the handle（which is the same method for both fridge door and freezer door）
a.Remove the right bush on the upper door trim, install it to left symmetrical position.
b.Remove two side of plastic hole cover and handle with a screwdriver,
c.fix them on the opposite side. Put the plastic hole cover that were situated where the
handles are presently.
Double check that the door is aligned correctly and all the seals are closed on all sides. If necessary,
re-adjust the levelling feet.
NOTE: If you want to have the door swing reversed, we recommend that your contact a qualified
technician. You should only try to reverse the door yourself if you believe that you are qualified to
do so.
All parts removed must be saved to do the reinstallation of the door. You should rest the fridge
freezer on something solid so that it will not slip during the door change process. Do not lay the
fridge freezer flat as this may damage the coolant system. Ensure the fridge freezer is unplugged
and empty. We recommend that 2 people handle the fridge freezer during assembly.

TROUBLE SHOOTING


If the appliance does not operate when switched on, check.

Power cut: If the internal temperature of the Fridge/Freezer compartment is -18℃ or
less when the power returns, your food is safe. The food in your Fridge/Freezer will
remain frozen for approx 16 hours with the door closed. Do not open the Fridge/Freezer
door more than necessary.

The product is designed and built for domestic household use only.

The plug is inserted properly in the socket and that the power supply is on. (To check the
power supply to the socket, plug in another appliance).

The fuse has blown/circuit breaker has tripped/main distribution switch has been turned
off.

The temperature control has been set correctly.

If the refrigerator is exceptionally cold, you may have accidentally adjusted the
thermostat control dial to a higher position.

If the refrigerator is exceptionally warm, the compressor may not be working. Turn the
thermostat control dial to the maximum setting and wait a few minutes. If there is no
humming noise, it is not working. Contact the local store where your purchase was
made.

If condensation appears outside of the Refrigerator, this may be due to a change in the
room temperature. Wipe off any residue of moisture. If the problem continues contact
the local store where your purchase was made.

If the provided plug has been replaced, make sure the new plug is properly connected. If
the appliance is still not operating after the above checks, please contact Customer
Service.
43