Musso MINI Anwendung & Wichtige Vorsichtsmassnahmen Seite 11

INSTRUCTIONS FOR USE
1. Plug the appliance into a single-phase 220V wall socket, or a
socket with the voltage shown on the appliance itself.
2. Turn the TIMER knob through one complete clockwise turn.
3. Make sure the appliance is working correctly by testing the two
switches ("PADDLE" and "COLD") while the appliance is EMPTY.
4. After testing, pour in the mixture you wish to churn with the
machine turned off and the paddle and locking screw in their
places.
DO NOT POUR HOT MIXTURES INTO THE APPLIANCE AND DO NOT
EXCEED THE AMOUNT INDICATED
5. Use the timer to start the working cycle. Since the refrigerator
turns off when the machine stops, it is best to set the timer to 50
minutes to prevent the machine stopping before the ice cream is
ready.
If the machine is turned off, wait a few minutes before starting it
again.
To see if the ice cream is ready (after about 20-30 minutes), only
switch the paddle off.
To remove the ice cream more easily once churning is complete,
turn off the refrigerator ("COLD") and let the paddle work on its
own for a few minutes. The ice cream will blend better and this
makes it easier to remove.
6. MACHINE CLEANING
Remove the locking screw and lift out the paddle block.
Wash the bowl.
Put the paddle back making sure it is locked into exactly the right
place.
11