EUROM Coolperfect 180 Wifi Betriebsanleitung Seite 41

 Rotate the other end of the air discharge hose in the connection piece of the hose.
 Place the window beam fittingly in the opening of the window, see image. The
length of the window beam is adjustable from 76.5 to 123 cm.
 Attach the other end of the drain hose to the opening in the window panel in order
to direct the hot air to be discharged.
 You can also hang the outlet hose out of an open window; this method is less
efficient however.
 Avoid bends or pinches in the pipe. These will lead to a build-up of damp, waste air
which can cause leaks, overheating or lead to the air conditioning unit switching
off.
 Warning! Do not use your air conditioner before it is installed according to the
instructions described above!
 Warning! Ensure that no water can enter the device!
Heating
 Switch over to heat A (air grille connection) and B (hose connection) (see fig.)
41