eTIGER S3b Sim Secual Schnellstart Seite 23

Wireless Motion Detector
Features
The ES-D1A is a high performance wireless motion detector boasting a digital dual-core fuzzy
logic infrared control chip with intelligent analysis. This technology identifies interferences
created by body motion and reduces the false alarm rate.
With automatic temperature compensation and anti-air turbulence technology, it easily
adapts to environmental changes.
Design
1. LED indicator
2. Detection window
3. Bracket
LED indications
Blinks continuously: self-testing
Blinks once: an intruder is detected
Blinks twice: self-testing is complete; entering working mode.
Blinks once every 3 seconds: under-voltage indication: the batteries must be replaced. (You
will be informed by SMS when the batteries are low if the motion detector is registered in the
control panel.)
1
2
3
PCB Layout
LED working
indicator
Antenna
*Tamper switch
When the alarm system is armed, the tamper
switch will trigger the alarm if the case is
opened.
**Infrared sensor
Detects the infrared rays released by human
body motion. Do not touch the surface. Keep
the surface clean.
Alarm zone
setup
Tamper
switch*
Infrared
sensor**
AA 1.5V LR6
23