Menu Options; Dmx Linking - Chauvet INTIMIDATOR SPOT LED 450 Kurzanleitung

EN

Menu Options

Main Level
DMX Address
Run
Pan
Tilt
Display
Pan Angle
Tilt Angle
Channel
Temp. Disp
ResetSystem
Load Set

DMX Linking

Starting Address
Master/Slave
Connection
Programming Level
001–512
Slave
Fast
Slow
Sound
Normal
Reverse
Normal
Reverse
Bright
30Close
540
360
180
270
180
90
ADVANCED
Basic
No
Ok
No
Ok
The Intimidator™ Spot LED 450 can work with a DMX controller when linked
by DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar with
DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 499.
The Intimidator™ Spot LED 450 uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this product for
Master/Slave operation are in the User Manual.
Intimidator™ Spot LED 450 QRG
Sets the DMX starting address
Slave operating mode
Automatic mode, fast program
Automatic mode, slow program
Sound-Active mode
Normal pan operation
Reverse pan operation
Normal tilt operation
Reverse tilt operation
Display backlight remains on
Display backlight turns off after 30 seconds
of control panel inactivity
Pan angle restricted to 540°
Pan angle restricted to 360°
Pan angle restricted to 180°
Tilt angle restricted to 270°
Tilt angle restricted to 180°
Tilt angle restricted to 90°
14-channel mode
8-channel mode
Displays LED temperature
Does not reset fixture
Resets fixture
Does not load factory defaults
Loads factory defaults
5
Description