Commissioning The Boiler - Baxi LUNA3 COMFORT HT Gebrauchsanleitung Für Den Benutzer Und Installateur

WARNING
The first time the boiler is powered, or after a long period of shutdown, the message CLOW is shown on the display. This
means that the internal battery of the AVS 77 is charging. Charging lasts about 5 minutes and during this time the PARA-
METER PROGRAMMING function is disabled.
Though all temperature adjustments can be made, it is not possible to modify the parameters until the message disap-
pears from the display.
The battery is completely charged about 12 hours after powering the appliance.
To light the boiler correctly, proceed as follows:
• Power the boiler.
• Open the gas tap;
• Press button on the climate controller (figure 1) to set the boiler operating mode (see section 3.2).
N.B.:
if the SUMMER (
DHW demand
• To adjust CH and DHW temperatures, press the
Information and Programming
DHW temperature
adjustment
Summer-Winter-Heating
only-Off enable
DHW mode
Activate chimney sweep and gas valve
calibration (service)
Timer functions (holiday programme
- section 4.4)
Operating mode at comfort
temperature
Operating mode at economy
temperature
INSTRUCTIONS FOR USERS

3. COMMISSIONING THE BOILER

), la caldaia funzionerà solo in caso di prelievo mode is set, the boiler will only light during a
+/-
Economy - Comfort
Time format/ operating
information
Clock pie-chart
(heating programmer)
buttons as described in section 3.3.
Timer
Programmed operating mode
setting (Heating)
Manual/Automatic/Off
Days of
the week
Heating mode
Automatic mode enabled
Timer mode enabled
Flame modulation levels
Manual function
Burner lit
Standby (Off - section 3.2)
47
Ambient temperature
adjustment
Confirm
Figure 1
926.420.3 - EN