Advanced Setting Menu; Advanced Setting Menu (Zoom); Advanced Setting Menu (Focus) - Videotec MAXIMUS MVX Bedienungsanleitung

6.1.5.1 Advanced Setting Menu

From this menu it is possible to configure the camera
settings in more detail.
1. Zoom: Allows access to the Zoom submenu.
Focus: Allows access to the Focus submenu.
2.
Exposure: Allows access to the Exposure.
3.
Infrared: Allows access to the Infrared
4.
submenu.
White Balance: Allows access to the White
5.
Balance submenu.
6. Other: Allows access to the Other submenu.
ADVANCED
------------------------
1>ZOOM
2 FOCUS
3 EXPOSURE
4 INFRARED
5 WHITE BALANCE
6 OTHER
Fig. 20

6.1.5.2 Advanced Setting Menu (Zoom)

1. Zoom Speed: Sets the speed of the zoom. The
speed ranges between 0 (minimum speed) and
7 (maximum speed).
Digital Zoom: Enables the digital zoom.
2.
ZOOM
------------------------
1>ZOOM SPEED
2 DIGITAL ZOOM
Fig. 21
MNVCMVXCAM_1645_EN
>
>
>
>
>
>
: 7
: N

6.1.5.3 Advanced Setting Menu (Focus)

It allows you to configure the following parameters:
Focus Speed: Sets the speed of the Focus. The
1.
speed ranges between 0 (minimum speed) and
7 (maximum speed).
2. Autofocus: Enables or disables the autofocus.
When on, it is to automatically load Autofocus
at any positioning or movement of the zoom,
depending on the selected operating mode.
3. Autofocus Type: Sets the type of Autofocus. The
possible values are:
• Normal: Autofocus is always enabled.
• Interval: The autofocus function is activated
at regular intervals. The Interval is set every 5
seconds.
• Trigger: Autofocus recall on each position
or movement of the zoom. This is the
recommended solution.
Sensitivity: Sets the level of sensitivity. The
4.
possible values are:
• Normal: Focusing at the highest possible
speed. This is the recommended solution.
• Low: Slowed-down focusing. It is useful in
case of dim lighting as it makes the image
more stable.
FOCUS
------------------------
1>FOCUS SPEED
2 AUTOFOCUS
3 AUTOFOCUS TYPE:TRIGGER
4 SENSITIVITY
Fig. 22
: 2
: N
: NORMAL
15