Using with other equipment
Note
• Some DVD/HDD recorders (DVRs) may not allow timeshift
playback. Check the operation manual that came with your
recorder.
• For details about connection and setting procedures, see the
operation manual that came with your DVD/HDD recorder
(DVR).
Switching the SCART output
Video and audio signals output from INPUT 2 and INPUT 3 sources
are the same as those used for the current image display. You can
however change the setting so that DTV/satellite TV signals are
always output regardless of the current image display.
1
Press HOME MENU.
2
Select "Setup" (/ then ENTER).
3
Select "System Setup" (/ then ENTER).
4
Select "SCART Output" (/ then ENTER).
5
Select a desired parameter (/ then ENTER).
Auto
Fixed on DTV/SAT
Item
Description
Outputs video and audio signals coming from the
Auto
(default)
selected input source
Always outputs DTV/satellite TV signals
Fixed on
DTV/SAT
6
Press HOME MENU to exit the menu.
Note
• The following operations are given higher priority over the above
setting:
•Presetting a DTV/satellite TV programme for recording
•Execution of WYSIWYR (page 66)
• While in analogue TV mode, no signal is output even if "Fixed on
DTV/SAT" is selected for "SCART Output".
• When the Home Media Gallery screen is displayed, no signal is
output even if "Fixed on DTV/SAT" is selected for "SCART
Output".
Connecting a game console or
camcorder
Use the INPUT 5 terminals to connect a game console, camcorder
and other audiovisual equipment.
Media Receiver (front)
CHANNEL
USB
HDMI
PHONES
INPUT 5
Audio/Video cable
Game console/camcorder
Displaying an image from the game console or
camcorder
To watch an image coming from the game console or camcorder,
press INPUT 5 on the remote control unit or press INPUT on the
Media Receiver to select "INPUT 5".
Note
• Connect external equipment to only terminals that are to be
actually used.
KRP-M01
COMMON INTER
VIDEO
L AUDIO R
ANALOG RGB
COMMON INTER
PC
12
67
En