Navitel R300 GPS Bedienungsanleitung Seite 25

24 | USER MANUAL
Lock file
Stamp
EN
G-sensor
Parking monitor
Battery
LCD OFF
GPS location
In Record mode (REC), press Mode to protect the current recording. A key symbol will appear at the bottom of the
screen. Press again to remove protection. In Playback mode, select a file, press Menu and select Protect, then Lock
Current or Lock All. Protected files cannot be deleted or overwritten. Select Unlock Current / Unlock All to remove
protection.
This function adds date stamp to the record.
If the vehicle is hit by something, the DVR will automatically lock the current video.
In shutdown state, if vibration is detected, the device will turn on automatically and start recording. The file will be
protected (locked).
Red indicator lights up when the device is plugged into an external power supply; as the battery is charging, the red
light becomes green.
The device can automatically shut off the screen to reduce power consumption; time interval can be set in the LCD
OFF menu.
Device supports built-in GPS chipset and GPS antenna, it can show longitude, latitude and other information on your
current location. Press GPS Status to check GPS dates.