Diagnostics And Problem-Solving; The Inserts Do Not Slide Correctly Into The Press; The Clamp Does Not Close Completely; Guarantees - Virax 252900 Gebrauchsanleitung

Diagnostics and problem-solving

The inserts do not slide correctly into the press

Check that the inserts are compatible with the press fitting machine you are using.

The clamp does not close completely

Diagnostics
The set of inserts is defective

Guarantees

All our press fitting machines in the Viper range are guaranteed for 2 years.
Inserts are guaranteed for 5 years without profiles.

Technical form

For PER or PEX, PB and multi-layer pipes of Ø 12 to Ø 26 mm (TH profile).
TH26 profile : only for BARBI - COMAP - FRANKISCHE - GIACOMINI - IDROSANITARIA
BONOMI - INDUSTRIAL BLANSOL - IPALPEX - SOMATHERM - TIEMME - VALSIR
Press

Axial pushing force : 34 kN

Travel : 9.5 mm

Dimensions : 257 x 56 x 203

Manual hydraulic

Advancing trigger and return trigger.
Inserts

33 HRC very high resistance steel.
Solving the problem
Change the inserts
13