Stern-Befehle (*$) - US Robotics Courier Befehlshandbuch

Stern-Befehle (*$)

Wenn Sie den Befehl AT*$ eingeben, zeigt das I-modem einen
Überblick der Stern-Befehle an. Die Hilfeanzeige für Sternbefehle
ist in Abbildung 14.5 dargestellt.
at*$
HELP, Asterisk Commands (CTRL-S to Stop, CTRL-C to Cancel)
*Cn
*D0=n
*D1=n
*D2=n
*D3=n
*D4=n
*K=n
*M=n
*O=n
*P=n
*P1=n..n
*P2=n..n
*T=n
*T1=nn
*T1=nn
*T2=nn
90 Courier I-Modem Befehlshandbuch
Audio port volume
n=0 minimum
:
n=9 maximum
Dynamic Bandwidth Allocation in MultiLink PPP
n = 0 Enable Dynamic Bandwith Allocation
n = 1 Disable Dynamic Bandwith Allocation
Sample Time to increase bandwidth in MultiLink PPP
n=1-255 5 second units
Sample Time to decrease bandwidth in MultiLink PPP
n=1-255 5 second units
Threshold utilization level to increase bandwidth
n=1-100 %
Threshold utilization level to decrease bandwidth
n=1-100 %
Compression in PPP mode
n = 0 Pass Through Compression
n = 1 Auto Compression
n = 2 Turbo PPP Compression
Bus Configuration .
n=0 Point to Point
n=1 Multipoint
Dialing Mode
n=0 En-Bloc mode
n=1 Overlap Sending mode
PPP mode
n = 0 Set all PPP related default values
n = 1 Async to Sync PPP
n = 2 Single Link Turbo PPP
n = 3 Multi Link Turbo PPP
Voice Directory Number (DN0)
Data Directory Number (DN1)
Multi Link Tone
n = 0 Enable tone, for 2nd link
n = 1 Disable tone, for 2nd link
Voice channel TEI
Voice channel TEI
nn=1-63 Fixed TEI assignment
Data channel TEI. .
nn=0 Automatic assignment