Changing The On-Screen Display; Marker Setup Screen; Virtual Surround; Dialog Speed - Denon DVD-550SD Bedienungsanleitung

PLAYING A DISC

Changing the On-Screen Display

You can check information about the current disc by pressing
the DISPLAY button on the remote control.
1 Press the DISPLAY button
during playback to show the
current chapter.
• The elapsed and remaining playing time of the current
chapter will be displayed.
2 Press the DISPLAY button to show the current
title.
• The elapsed and remaining playing time of the current
title will be displayed.
3 Press the DISPLAY button
to show the BIT RATE and
the current repeat setting.
• If you are playing a dual
layered disc, the layer number will also be displayed
( L0: Layer 0 is playing. L1: Layer 1 is playing).
4 Press the DISPLAY button to remove the display.
1
Press the DISPLAY button during playback, the
current track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2
Press the DISPLAY button to show the total tracks.
• The elapsed and remaining playing time of the disc will
be displayed.
3
Press the DISPLAY button to remove the display.
Hints for the On-Screen Display
• C - indicates Chapter repeat
• T - indicates Title or Track repeat
• A - indicates Disc repeat
• A B- indicates A-B repeat

Marker Setup Screen

Use markers to memorise your favourite places on a disc.
1 Press the SEARCH MODE
button repeatedly until the
display screen and Markers
appear during playback.
2 Press the Cursor buttons
3, 4, 5, 6, 7, 8, 9, or 10 and ensure that "_ : _ _ : _
_" appears in the display.
3 When the disc reaches the point where you want
to remember, press the ENTER button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4
To return to the Marker later, press the SEARCH
MODE button repeatedly during playback and the
s or B button to choose the desired marker, then
press the ENTER button.
5 Press the SEARCH MODE or RETURN button to
exit.
NOTES:
• Opening the disc tray or turning off the power or select
2
AC at step and press the ENTER button will erase
all Markers.
DVD
9/49 0:00:00 -0:03:30
IIIIIII
T L1
CD VCD
DVD CD VCD
1 2 3 4 5 6 7 8 9 10 AC
-- -- : -- : --
s or B ) to select 1, 2,
(
• To clear a marker, using the s or B button, position
the cursor on to the marker number to be cleared and
press the CLEAR button.
• You can mark up to 10 points.

Virtual Surround

DVD
You can enjoy surround-sound effect with two speakers.
1 During playback, press the
MODE button repeatedly
until the Virtual Surround
setting appears.
2
Press the ENTER button to set it 1(Natural effect),
2(Emphasized effect) or OFF.
3
Press the RETURN button to exit.
NOTES
:
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than "STEREO". (for Audio
CD or Video CD play only)
• This function cannot be used during Dialog Speed.

Dialog Speed

Available only on discs recorded in the Dolby Digital format.
Dialog Speed plays back in slightly faster or slower speed
while keeping the sound quality as in the normal playback.
1
During playback, press the
MODE button repeatedly
until the Dialog Speed set-
ting appears.
• "OFF" appears on the TV screen.
2
Press the ENTER button or the Cursor button
or B to switch among
)
OFF.
: Plays back approximately at 0.8 times of nor-
mal playback.
: Plays back approximately at 1.3 times of nor-
mal play back.
3
To return to normal playback, press the PLAY but-
ton.
NOTES
:
• Every time you press the STOP button, the setting will
be turned OFF.
• Subtitle can be viewed during this function.
• Picture Control and Audio (language) setting cannot be
changed while using this mode.
• Virtual Surround does not function while using this
mode.
• This feature may not work at some point in a disc.
• When using digital audio connection (OPT-1 or OPT-2),
the LPCM sound (2 channel) will be output.
• When using the Dialog Speed function with 5.1 channel
digital outputting, the analog output sound will be fixed
at 2 channel.
• When using digital audio connection, only the Dolby
Digital sound will be available.
– 22 –
VCD CD MP3
OFF
OFF
(x1.3),
WMA
DVD
(
s
(x0.8) and
EN