Self Clean Operation; Display Button - Sharp AY-XPC12RR Bedienungsanleitung

SELF CLEAN OPERATION

SELF CLEAN operation will reduce the
growth of mold fungus with Plasmacluster
ions and dry inside of the unit. Utilize the
operation at seasonal change over terms
1
Press the SELF CLEAN button when
the unit is not operating.
• The remote control will display "
(The " " will disappear automatically in
1 minute.)
• The green SELF CLEAN lamp (
the blue PLASMACLUSTER lamp (
the unit will light up.
• The unit will stop operation after 40 min-
utes.
TO CANCEL
Press the STOP button.
• The green SELF CLEAN lamp (
the blue PLASMACLUSTER lamp (
turn off.
NOTE:
• You cannot set the temperature, fan speed, air
fl ow direction or timer setting during the SELF
CLEAN operation.
• Mold fungus already grown can not be
eliminated by this operation.

DISPLAY BUTTON

Press the DISPLAY button when the lamps
on the unit are too bright. (The green OP-
ERATION lamp and the orange TIMER
lamp cannot be turned off.)
.
1
During operation, press the DIS-
PLAY button.
".
• The blue PLASMACLUSTER lamp (
) and
TO LIGHT UP
)on
Press the DISPLAY button again.
) and
)will
1
GB-12
and/or the orange FULL POWER lamp
( )will turn off.
)
1