Troubleshooting; Spare Parts And Accessories - SKF TKRS 11 Bedienungsanleitung

6. Troubleshooting

Problem
Display is dirty
Menu is frozen
Too short
operating time

7. Spare parts and accessories

Designation
TDTC 1/A
N O T E S :
Static images are produced when the lash frequency is identical to, or a
multiple or fraction of the frequency of the motion.
Solution
Use a wet cotton swab to clean the display area and a clean,
dry cotton cloth to remove any water remains.
Do not wash the display with too much water or solvents.
Remove the batteries and wait for 1 minute before placing
them back.
Start the device and check that everything works.
Replace batteries with new batteries.
Check if another brand offers better performance.
Do not store the stroboscope in very hot or cold
environments.
Turn on the auto off function.
TKRS 11
General toolcase without inlay, size A
EN 17